LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnection and Connection >> Installation Procedure

Installation Procedure

    Fig 1: View Of Battery & Cables
    GM1544743Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
  1. Install the negative battery cable to the battery.
  2. NOTE: Refer to Fastener Notice .
  3. Tighten the negative battery cable (2) nut.

    Tighten:  Tighten the nut to 16 N.m (12 lb ft).

  4. Reprogram the radio presets. Refer to Radio Setup .
  5. Re-initialize the power sliding doors. Refer to Rear Side Door Actuator Control Module Programming and Setup .