LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis (Single Page) >> Suspension >> Suspension Control Systems >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Sensor Replacement (IRS) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Automatic Level Control Height Sensor Bracket Bolts
    GM881333Courtesy of GENERAL MOTORS CORP.
  1. Install the ALC sensor to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the height sensor bracket bolts (1).

    Tighten:  Tighten the height sensor bracket bolts to 85 N.m (63 lb ft).

  3. Install the ALC sensor link onto the sensor arm ball stud.
    4. Fig 2: View Of Automatic Level Control Sensor Electrical Connector
    GM881329Courtesy of GENERAL MOTORS CORP.
  4. Install the ALC height sensor electrical connector (1).
  5. Lower the vehicle.
  6. Install the ELC/TRAILER fuse.
  7. Perform a diagnostic system check. Refer to Diagnostic System Check - Vehicle .
  8. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals