Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Relay. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Outside Rearview Mirror

Courtesy of GENERAL MOTORS CORP.

Position the outside rearview mirror (1) to the front door, ensuring the seal is in position.

NOTE: Refer to Fastener Notice .

Install the outside rearview mirror nuts.
Tighten: Tighten the nuts, in sequence as shown, to 10 N.m (89 lb in).
Connect the mirror electrical connectors (2).
Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .