Removal Procedure

Fig 1: Identifying Outside Rearview Mirror Glass

Courtesy of GENERAL MOTORS CORP.

CAUTION: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

NOTE: When servicing electrochromic glass that is broken or if glass breaks during servicing, be cautious not to spill electrochromic fluid onto vehicle. Doing so will cause damage to the vehicle.

Position the mirror face outward on a angle with the mirror housing.

Fig 2: Identifying Bottom Outboard Corner And Top Inboard Edge Corner

Courtesy of GENERAL MOTORS CORP.

Remove the mirror face as follows:
1. Position the hand in the center of the mirror face.
2. Apply light pressure.
3. Push upward releasing the motor retainers from the mirror back.
4. Holding the mirror face, disconnect the electrical connectors from the back of the mirror.