Power Steering Fluid Cooler Replacement

Fig 1: View Of Power Steering Fluid Cooler

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1	Power Steering Reservoir Inlet Hose Clamp Procedure Remove as much power steering fluid from the remote power steering fluid reservoir as possible. Place drain pans under the vehicle as needed.
2	Power Steering Cooler Hose Clamp
3	Power Steering Fluid Cooler Nuts (Qty 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
4	Power Steering Fluid Cooler