Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Relay. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing & Installing Coaxial Cable

Courtesy of GENERAL MOTORS CORP.

Install the antenna cable retainers to the receiver bracket.

Fig 2: Identifying XM Digital Radio Receiver

Courtesy of GENERAL MOTORS CORP.

Connect the antenna cable to the digital radio receiver.

Fig 3: Locating Cable Connectors Inside Of Instrument Panel (I/P)

Courtesy of GENERAL MOTORS CORP.

Install the cable connectors to the right side end cap on the I/P.

Fig 4: View Of Antenna Base Assembly

Courtesy of GENERAL MOTORS CORP.

Install the antenna cable retainer clips.
Connect the antenna cable to the antenna base cable connector.
Install the headliner. Refer to Headlining Trim Panel Replacement .