Installation Procedure
- Clean the gasket surfaces. Mating surfaces should be clean and dry.
- Install the rear gasket cover.
- Install the rear cover and bolts.
Tighten: Tighten the rear cover bolts to 24 N.m (18 lb ft).
- Fill the transaxle to the proper fluid level. Refer to Transmission Fluid Replacement .
- Install the left front wheel. Refer to Tire and Wheel Removal and Installation (4 Lug Wheel) or Tire and Wheel Removal and Installation (5 Lug Wheel) in Tires and Wheels.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.