LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Headlamp/Turn Signal Switch
    GM878308Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the multifunction turn signal switch to the steering column.

    Tighten:  Tighten the multifunction turn signal switch screws to 2 N.m (17 lb in).

  2. Connect the multifunction turn signal switch harness connector.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Except Redline)  or Steering Column Trim Covers Replacement (Redline) .
scientia non olet · About LEMON Manuals