Brake Pedal Position Sensor Replacement
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the steering column opening filler. Refer to Fastener Tightening Specifications . |
|
| 1 | Brake Pedal Position Sensor Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Brake Pedal Position Sensor Procedure: Disconnect the electrical connection. |