LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Engine Controls And Fuel - 2.2L - DTC P0420 To DTC P2544) >> DTC P1682 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2007 Saturn Ion 3 and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
  1. If DTCs P0685, P0689, P0690, or B1380 are set, diagnose those DTCs first.
  2. Ignition ON, engine OFF, observe the Ignition 1 voltage signal, and the EC Ignition Relay Feedback signal parameters, on the scan tool. Both parameter values should display no more than 3 volts difference, between the two parameters.
  3. Ignition OFF, observe the ignition 1 voltage signal parameter, on the scan tool. The parameter value should be 0 volts, before the ECM powers down.
scientia non olet · About LEMON Manuals