LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Connect the stabilizer link to the strut assembly.

    Tighten:  Tighten the stabilizer link nut to 65 N.m (48 lb ft).

    2. Fig 1: View Of Stabilizer Link At Strut Assembly
    GM851723Courtesy of GENERAL MOTORS CORP.
  2. Connect the stabilizer link to the stabilizer shaft.

    Tighten:  Tighten the stabilizer link nut to 80 N.m (59 lb ft).

    3. Fig 2: View Of Stabilizer Link At Stabilizer Shaft
    GM851720Courtesy of GENERAL MOTORS CORP.
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals