LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Steering Column Filler Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the rear compartment release switch electrical connector.
    2. Fig 1: View Of Rear Compartment Release Switch Electrical Connector
    GM877797Courtesy of GENERAL MOTORS CORP.
  2. Align the retaining fasteners with the I/P.
  3. Push the filler panel in order to secure.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the filler panel screws.

    Tighten:  Tighten the filler panel screws to 2.5 N.m (22 lb in).

    5. Fig 2: View Of I/P Filler Panel
    GM877793Courtesy of GENERAL MOTORS CORP.
  5. Install the left I/P outer trim cover. Refer to Instrument Panel (I/P) Outer Trim Cover Replacement .
scientia non olet · About LEMON Manuals