Installation Procedure
WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Align the console end panel tabs to the console and rotate into position.
- Install the console end panel screws.
Tighten: Tighten the console end panel screws to 2.5 N.m (22 lb in).
- Install the front floor console. Refer to Console Replacement - Front Floor .
NOTE:
Refer to Fastener Notice
in Cautions and Notices.