LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Charging System Test

Charging System Test

Charging System Test

Step Action Value(s) Yes No
1 Did you perform the Diagnostic System Check - Vehicle? - Go to Step 2  Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2 Start the engine. Observe the charge indicator on the instrument panel cluster (IPC) or message in the driver information center (DIC).
Does the charge indicator illuminate or the DIC display a charging system message?		 - Go to Step 3  Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
3
  1. Turn OFF the ignition.
  2. Connect the red lead of the SA9154Z-A  Starting and Charging System Tester to the battery positive terminal
  3. Connect the grey lead of the SA9154Z-A  to the output circuit of the generator.
  4. Start the engine.
  5. Turn ON the SA9154Z-A  .
  6. Turn OFF all vehicle accessories.
  7. Follow the SA9154Z-A  prompts.
  8. Press CHARGING SYSTEM TEST.
Is the voltage displayed within the specified value?		 13-15.5 V Go to Step 4  Go to Step 5 
4 Is the generator output current greater than or equal to the load test value given in Generator Usage  ? - Go to Step 6  Go to Step 5 
5 Replace the generator. Refer to Generator Replacement (RPO LSJ)  or Generator Replacement (RPOs L61/LE5) .
Did you complete the replacement?		 - Go to Step 6  -
6 Operate the vehicle in order to verify the repair.
Did you correct the condition?		 - Generator OK Go to Step 2 
scientia non olet · About LEMON Manuals