LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System And TCS >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of EBCM Electrical Connector
    GM890987Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. Release the electronic brake control module (EBCM) wiring harness retainer from the brake pressure modulator valve (BPMV) bracket.
    3. Fig 2: Locating Insulator Nuts
    GM890990Courtesy of GENERAL MOTORS CORP.
  3. Loosen the 2 insulator nuts (1) on the BPMV assembly.
  4. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
    5. Fig 3: ABS Modulator Bracket Forward Lamp Harness Retainer
    GM891778Courtesy of GENERAL MOTORS CORP.
  5. Release the forward lamp wiring harness from the BPMV bracket.
    6. Fig 4: View Of BPMV Bracket
    GM890992Courtesy of GENERAL MOTORS CORP.
  6. Remove the brake pressure modulator assembly bracket mounting nut and mounting bolts.
  7. Remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals