LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System And TCS >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of BPMV Bracket
    GM890992Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV assembly bracket to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the brake pressure modulator assembly bracket mounting nut and mounting bolts.

    Tighten: 

    • Tighten the nut to 25 N.m (18 lb ft).
    • Tighten the bolts to 25 N.m (18 lb ft).

    3. Fig 2: ABS Modulator Bracket Forward Lamp Harness Retainer
    GM891778Courtesy of GENERAL MOTORS CORP.
  3. Secure the forward lamp wiring harness retainer to the BPMV bracket.
    4. Fig 3: Locating Insulator Nuts
    GM890990Courtesy of GENERAL MOTORS CORP.
  4. Install the brake modulator assembly to the bracket.
  5. Tighten the 2 brake pressure modulator assembly insulator nuts (1).

    Tighten:  Tighten the nuts to 8 N.m (71 lb in).

  6. Secure the EBCM wiring harness retainer to the BPMV bracket.
scientia non olet · About LEMON Manuals