LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion Red Line >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers System And Washer System >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Wipers/Washer Signal Switch Retaining Screws
    GM878314Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the wipers/washer signal switch to the steering column.

    Tighten:  Tighten the wipers/washer signal switch screws to 2 N.m (17 lb in).

  2. Connect the wipers/washer switch harness connector.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Except Redline) or Steering Column Trim Covers Replacement (Redline) in Steering Wheel and Column.
scientia non olet · About LEMON Manuals