LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Ion 2 4D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion Red Line, 2006 Saturn Ion 3, and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stop Lamp Switch
GM877870Courtesy of GENERAL MOTORS CORP.
  1. Connect the stop lamp switch electrical connector.
  2. Insert the stop lamp switch into the retainer.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 2: View Of Accelerator Pedal
    GM878828Courtesy of GENERAL MOTORS CORP.
  3. Install the accelerator pedal to the dash panel. Install the retaining nuts.

    Tighten:  Tighten the accelerator pedal retaining nuts to 10 N.m (89 lb in).

  4. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .
scientia non olet · About LEMON Manuals