LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Aura Green Line >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Programming And Setup - All Systems >> Repair Instructions >> Power Steering Control Module Programming and Setup >> Steering Tuning Selection

Steering Tuning Selection

  1. Install a scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. With the scan tool select Special Functions
  4. Select Steering Tuning Selection and press the enter key. The scan tool screen will flash Selection in Progress, then display Selection Complete.
  5. Press the exit key.
  6. Use the scan tool in order to clear any EPS DTCs.
    7. IMPORTANT: After turning OFF the ignition, allow 25 seconds of wait time before performing any procedures that require the vehicles battery to be disconnected or module memory loss may occur.
  7. Turn OFF the ignition.
scientia non olet · About LEMON Manuals