LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Aura Green Line >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of BCM
    GM1207700Courtesy of GENERAL MOTORS CORP.
  1. Install the BCM.
  2. Install the BCM wire harness connectors.
    3. NOTE: Refer to Fastener Notice .
  3. Install the BCM screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  4. Install the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LAT) or Battery Negative Cable Disconnection and Connection (LZ4/LY7) .
  6. For a new or remanufactured BCM, program the BCM. Refer to Body Control Module Programming and Setup .
scientia non olet · About LEMON Manuals