LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Relay 3.9 1, FWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the lower transmission oil cooler (TOC) line from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  2. Remove the cooling fans and shroud. Refer to Cooling Fan and Shroud Replacement (LX9)  or Cooling Fan and Shroud Replacement (LZ9) .
  3. Remove radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LX9)  or Radiator Inlet Hose Replacement (LZ9) .
  4. Remove the radiator outlet hose. Refer to Radiator Outlet Hose Replacement (LX9)  or Radiator Outlet Hose Replacement (LZ9) .
    5. Fig 1: Radiator/Condenser Fasteners
    GM1547214Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolt that secures the radiator to the condenser.
  6. Remove the condenser tube clip screw.
  7. Tilt the radiator and condenser inwards toward the engine and remove the radiator.
scientia non olet · About LEMON Manuals