Front Side Door Outside Handle Replacement

Fig 1: Replacing Front Outside Door Handle

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement . Disconnect the electrical connector to door lock cylinder, if equipped. Using a small flat-bladed tool, press in on the retaining tabs to release the front door window from the front door window sash. Slide the glass full up and tape in place.
1	Access Cover Plug Tip: Remove the plug to access the upper rear door handle bolt.
2	Front Door Handle Bolts (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
3	Front Outside Door Handle Tip: Partially remove in order to access the door handle latch and lock rods.
4	Front Door Lock Rod Tip: Disconnect the lock rod from the outside handle lock cylinder.
5	Front Door Latch Handle Rod Tip: Disconnect the latch rod from the outside handle.