Installation Procedure
- Lubricate a new O-ring with DEXRON III transmission fluid Saturn P/N 121019223.
- Install the new O-ring.
- Install the VSS retainer.
Install the vehicle speed sensor (VSS) assembly.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices. - Install the VSS retainer bolt.
Tighten: Tighten the bolt to 9 N.m (80 lb in).
- Connect the VSS connector to the VSS (2).
- Install the left front wheel. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels.