LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement (5-Stud Pattern) >> Installation Procedure

Installation Procedure

Fig 1: Identifying Washers & Wheel Nut (5-Stud Pattern)
GM1233071Courtesy of GENERAL MOTORS CORP.
  1. With the bearing hub still in position, install the NEW stud into the bearing/hub assembly.
  2. Add enough washers (1) in order to draw the stud into the hub.
  3. Install the wheel nut (2) with the flat side against the washers.
  4. Tighten the wheel nut until the head of the wheel stud is fully seated against the back of the bearing hub flange.
  5. Remove the wheel nut and the washers.
  6. Install the brake rotor abd install the brake caliper and bracket as an assembly. Refer to Brake Rotor Replacement - Front in Disc Brakes.
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals