LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Rack and Pinion Outer Tie Rod End Replacement >> Installation Procedure

Installation Procedure

  1. Thoroughly clean the inner tie rod threads.
    Fig 1: Identifying Tie Rod Inner Jam Nut
    GM854976Courtesy of GENERAL MOTORS CORP.
  2. Install a new outer to inner tie rod jam nut.
    Fig 2: View Of Outer & Inner Tie Rods
    GM854987Courtesy of GENERAL MOTORS CORP.
  3. Thread the outer tie rod onto the inner tie rod using the previously recorded thread count.
    Fig 3: View Of Tie Rod End To Steering Knuckle
    GM854972Courtesy of GENERAL MOTORS CORP.
  4. Install the outer tie rod to the steering knuckle.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install a new outer tie rod nut.

    Tighten:  Tighten the nut to 60 N.m (44 lb ft).

  6. Install the front wheel. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels.
  7. Set the toe. Refer to Front Toe Adjustment in Wheel Alignment.
scientia non olet · About LEMON Manuals