Disabling Procedure
- Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
- Turn the ignition switch to the OFF position.
- Remove the key from the ignition switch.
- Locate the body control module (BCM) fuse center in the driver's side of the floor console, then remove fuse center cover.IMPORTANT: With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
- Locate and remove the AIR BAG fuse from the body control module fuse center.
- Remove the passenger/right outer trim cover from the instrument panel (I/P) (3). Refer to Instrument Panel (I/P) Trim Panel Replacement - Right
- Remove the connector position assurance (CPA) from the I/P module connector (2).
- Disconnect the I/P module connector (1) from the vehicle harness connector (2).