LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Replacement >> Removal Procedure

Removal Procedure

CAUTION: Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 8 (Coupe)  or SIR Disabling and Enabling Zone 8 (Sedan) .
  2. Remove the floor console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
    Fig 1: View Of SDM
    GM876390Courtesy of GENERAL MOTORS CORP.
  3. Remove the connector position assurance (CPA) from the sensing and diagnostic module (SDM) harness connector.
  4. Disconnect the SDM harness connector from the SDM.
  5. Remove the SDM mounting nuts.
  6. Remove the SDM from the floor pan.
scientia non olet · About LEMON Manuals