LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Seat Belt System) >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Child Tether Anchors
    GM876611Courtesy of GENERAL MOTORS CORP.
  1. Position the child tether anchor tab to the alignment hole in the rear shelf.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the child tether anchor bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  3. Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf .
  4. Close the anchor bezel, pressing into place until fully seated.
scientia non olet · About LEMON Manuals