LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Engine Controls - 2.2L - Introduction (2 Of 2)) >> Repair Instructions >> Spark Plug Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion 3 and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This engine has aluminum cylinder heads. Do not remove the spark plugs from a hot engine, allow it to cool first. Removing the spark plugs from a hot engine may cause spark plug thread damage or cylinder head damage.
  1. Remove the ignition coil housing. Refer to Ignition Coil Housing Replacement .
    Fig 1: View Of Spark Plugs
    GM465982Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove any water and debris from the spark plug holes before spark plug removal with compressed air.
  2. Remove the spark plugs with a spark plug socket.
  3. Inspect the spark plugs. Refer to Spark Plug Inspection .
scientia non olet · About LEMON Manuals