LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Engine Controls - 2.2L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion 3 and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Cautions and Notices.
Fig 1: View Of Fuel Level Sensor Tabs
GM889989Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
  2. Release the fuel level sensor wiring harness from the molded-in tab (1) on the pump module bowl.
  3. Disconnect the fuel level sensor electrical connector from the pump module.
  4. Depress the retaining tab (2) on the sensor and begin to slide the level sensor away from the pump module.
  5. Carefully slide the level sensor the rest of the way off of the pump module.
scientia non olet · About LEMON Manuals