LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Engine Controls - 2.2L - Introduction (2 Of 2)) >> Repair Instructions >> Engine Control Module (ECM) Replacement >> Notes

Engine Control Module (ECM) Replacement: Notes

WARNING: This page is about a different car, the 2006 Saturn Ion 3 and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: In order to prevent any possible electrostatic discharge damage to the ECM, do not touch the connector pins or the soldered components on the circuit board.
NOTE: Always turn the ignition off when installing or removing the ECM connectors in order to prevent damage to the components.
IMPORTANT: It is necessary to record the remaining engine oil life. If the replacement module is not programed with the remaining engine oil life, the engine oil life will default to 100%. If the replacement module is not programmed with the remaining engine oil life, the engine oil will need to be changed at 5000 km (3,000 mi) from the last engine oil change.
scientia non olet · About LEMON Manuals