LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Engine Controls - 2.2L - Introduction (2 Of 2)) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Saturn Ion 3 and 2006 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Verify full engagement of the inlet onto the resonator neck.
  1. Position the air cleaner assembly.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the air cleaner assembly attachment nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

    Fig 1: View Of Air Cleaner Assembly
    GM854291Courtesy of GENERAL MOTORS CORP.
  3. Connect the air cleaner resonator to the air cleaner assembly.

    Tighten:  Tighten the air cleaner intake duct clamp to 5 N.m (44 lb in).

scientia non olet · About LEMON Manuals