LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Rear Suspension System) >> Repair Instructions >> Spring Bumper Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Lower the rear axle in order to gain access to the top portion of the rear springs. Refer to Coil Spring Replacement .
    3. Fig 1: View Of Coil Spring
    GM855051Courtesy of GENERAL MOTORS CORP.
  3. Remove the upper spring seat/jounce bumper from the spring, while leaving the lower spring seat on the axle.
    4. Fig 2: View Of Upper Spring Seat/Jounce Bumper
    GM855055Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals