LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (General Information) >> Introduction >> Key and Lock Cylinder Coding >> Removing the Ignition Lock from the Column

Removing the Ignition Lock from the Column

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. There are two retainers on the ignition lock. One is to retain the lock to the column driver and the other is to retain the lock in the column.
  2. Rotate lock to the run position.
  3. Depress two retainers to remove the lock from the column housing.
  4. Though the poke hole depress the first retainer. The lock will back out slightly.
  5. Pullout lock about 3/4 of an inch.
  6. Depress the second retainer to release the lock from the column. If the lock cylinder can not be rotated to remove, the lock module must be replaced.
scientia non olet · About LEMON Manuals