Conditions for Running the DTC

DTCs P0030, P0036, P0068, P0069, P0097, P0098, P0101, P0102, P0103, P0106, P0107, P0108, P0117, P0118, P0120, P0121, P0131, P0132, P0134, P0135, P0141, P0201, P0202, P0203, P0204, P0220, P0300, P0442, P0443, P0446, P0449, P0452, P0453, P0461, P0496, P1516, P1681, P2101, P2135, or P2176 are not set.
The catalyst test is not active.
The ECT Sensor parameter is more than 70°C (158°F).
The Engine Speed parameter is between 1,000-3,500 RPM.
The Ignition 1 Signal parameter is between 11-18 volts.
The Engine Run Time parameter is more than 200 seconds.
The Loop Status parameter is closed.
The TP Indicated Angle parameter is equal to or more than 5 percent.
The Fuel Level Sensor parameter is more than 10 percent.
The MAF Sensor parameter is between 15-50 g/s.
DTC P1133 runs continuously when the above conditions are met for 2 seconds.