Conditions for Running the DTC
IMPORTANT:
The following conditions must be met prior to ignition OFF.
- DTCs P0095, P0096, P0097, P0098, P0107, P0108, P0112, P0113, P0117, P0118, P0125, P0128, P0336, P0443, P0446, P0452, P0453, P0455, P0461, P0462, P0463, P0464, P0496, P0502, P0503, P2610 are not set.
- The diagnostic runs once after a cold start drive cycle.
- DTC P0455 must run and pass.
- The start up intake air temperature (IAT) is between 4-30°C (39-86°F).
- The start up engine coolant temperature (ECT) is less than 30°C (86°F).
- The start up IAT and ECT are within 8°C (15°F).
- The barometric pressure (BARO) is more than 74 kPa.
- The ambient air temperature is between 2-32°C (36-90°F).
- The engine run time minimum is 10 minutes.
- The vehicle has traveled more than 5 km (3.1 mi) this trip.
- The ECT is more than 70°C (158°F).
- The fuel level is between 15-85 percent.
- The ignition is OFF.
- One test occurs at ignition OFF after a drive cycle and may require up to 45 minutes to complete. No more than 2 tests per day are allowed. To report a fail, 5-12 tests must be completed.