Conditions for Running the DTC

DTCs P0030, P0068, P0069, P0101, P0102, P0103, P0106, P0107, P0108, P0117, P0118, P0120, P0121, P0125, P0128, P0130, P0131, P0132, P0133, P0134, P0135, P0201, P0202, P0203, P0204, P0220, P1133, P1516, P1681, P2101, P2135, P2176 are not set.
The Engine Run Time parameter is more than 200 seconds.
The Engine Speed parameter is between 1,000-3,400 RPM.
The Ignition 1 Signal parameter is between 11-18 volts.
The Mass Airflow (MAF) Sensor parameter is between 10-50 g/s.
The Engine Coolant Temperature (ECT) Sensor parameter is more than 50°C (122°F).
The traction control is not active.
The catalyst protection mode is not active.
Decel fuel cut-off is not active.
Power enrichment is not active.
DTC P0130 runs continuously when the above conditions are met for 2 seconds.