Conditions for Running the DTC

DTCs P0030, P0068, P0069, P0097, P0098, P0101, P0102, P0103, P0106, P0107, P0108, P0117, P0118, P0120, P0121, P0125, P0128, P0131, P0132, P0134, P0201, P0202, P0203, P0204, P0220, P0300, P0442, P0443, P0446, P0449, P0452, P0453, P0461, P0496, P1133, P1516, P1681, P2101, P2135, or P2176 are not set.
The Engine Coolant Temperature (ECT) Sensor parameter is more than 70°C (158°F).
The Ignition 1 Signal parameter is between 11-18 volts.
The Fuel Level Sensor parameter is more than 10 percent.
The Engine Run Time parameter is more than 200 seconds.
The Engine Speed parameter is between 1,000-3,500 RPM.
The Manifold Absolute Pressure (MAP) Sensor parameter is more than 30 kPa.
The Mass Airflow (MAF) Sensor parameter is between 15-50 g/s.
The Loop Status parameter is closed.
The Throttle Position (TP) Indicated Angle parameter is more than 5 percent.
The catalyst test is not active.
Traction control is not active.
No fuel injectors are disabled.
The transmission is not in Park, Reverse, or Neutral.
DTC P0133 runs once per drive cycle when the above conditions are met for 2 seconds.