LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Surge Tank Replacement >> Removal Procedure

Removal Procedure

  1. Drain the cooling system. Refer to Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5) Static Fill) , Draining and Filling Cooling System (2.0L (LSJ) Static Fill)  or Draining and Filling Cooling System (GE 47716 Fill) .
  2. Lower the vehicle.
    Fig 1: View Of Surge Tank Inlet Hose
    GM873719Courtesy of GENERAL MOTORS CORP.
  3. Reposition the surge tank inlet hose clamp.
  4. Remove the surge tank inlet hose from the surge tank.
    Fig 2: View Of Engine Compartment Component Locations
    GM889782Courtesy of GENERAL MOTORS CORP.
  5. Remove the underhood junction block bracket nuts (1,2).
  6. Remove the underhood junction block bracket bolt (3).
  7. Lift the underhood junction block bracket and position away from the surge tank.
    Fig 3: View Of Surge Tank & Surge Tank Outlet Hose
    GM873720Courtesy of GENERAL MOTORS CORP.
  8. Remove surge tank bolt. Lift surge tank and reposition the surge tank outlet hose clamp using SA9111E  . See Special Tools .
  9. Remove surge tank outlet hose.
    Fig 4: View Of Coolant Level Sensor Electrical Connector
    GM873721Courtesy of GENERAL MOTORS CORP.
  10. Disconnect the coolant level sensor electrical connector.
  11. Remove surge tank.
scientia non olet · About LEMON Manuals