Installation Procedure
IMPORTANT:
Do not tip the battery more than 40 degrees during battery installation.
- Install the battery.
- Install the battery strap and retainer.NOTE: Refer to Fastener Notice .
- Install the battery retainer bolt.
Tighten: Tighten the bolt to 18 N.m (13 lb ft).
- Install the battery vent tube to the battery and grommet.
- Position the positive battery cable (1) to the battery.
- Tighten the positive battery cable bolt.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .