Installation Procedure

Fig 1: Identifying Negative/Positive Battery Cable

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.

Position the negative battery cable (2) to the battery.
NOTE: Refer to Fastener Notice .
Tighten the negative battery cable bolt.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).
Install the rear compartment trim panel. Refer to Compartment Trim Panel Replacement - Rear .
Reset the radio stations and the clock.