LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Drive System Module Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Wiper Module Assembly
GM869668Courtesy of GENERAL MOTORS CORP.
  1. Install the wiper module assembly into the plenum.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners attaching the wiper module assembly to the plenum.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in)

  3. Connect the wiring connector to the wiper motor.
  4. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  5. Install the wiper arms. Refer to Wiper Arm Replacement .
scientia non olet · About LEMON Manuals