LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Shift Lock Control System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the solenoid onto the shifter assembly. Connect the plastic retainers at the solenoid base and at the park brake lever.
    Fig 1: Brake Transaxle Shift Interlock Solenoid
    GM944074Courtesy of GENERAL MOTORS CORP.
  2. Connect the BTSI solenoid harness connector.
  3. Verify proper operation.
  4. Remove the I/P storage compartment. Refer to Storage Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5 in Restraints - SIR.