Removal Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the upper instrument panel (I/P) trim pad.
- Locate the recirculation actuator (2).
- Disconnect the recirculation actuator electrical connector (1).
- Remove the recirculation actuator bolts/screws (1).
- Remove the recirculation actuator (7).
- Remove the recirculation actuator levers (3, 6), if necessary. Note positioning for re-installation.