LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 3.5L (L66) Introduction) >> Repair Instructions >> Fuel Pressure Relief Procedure >> Relief Procedure

Relief Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Connect the SA9127E  to the fuel pressure connection. Refer to Fuel Pressure Gage Installation and Removal .
  3. Install the bleed hose (3) into an approved container and open the valve (5) to bleed the system pressure. The fuel connections are now safe for servicing.
  4. Disconnect the fuel pressure gage from the fuel pressure connection. Refer to Fuel Pressure Gage Installation and Removal .
scientia non olet · About LEMON Manuals