LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls (Introduction) - 3.4L (La1)) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn OFF the ignition.
    2. Fig 1: Accelerator Cable & Components
    GM12287Courtesy of GENERAL MOTORS CORP.
  2. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (Outboard) or Closeout/Insulator Panel Replacement - Left (Inboard) in Instrument Panel, Gauges, and Console.
  3. Disconnect the accelerator cable (5) from the accelerator pedal (1).
  4. Squeeze the accelerator cable cover tangs and push the accelerator cable through the bulkhead.
    5. Fig 2: Identifying Accelerator Cable
    GM12735Courtesy of GENERAL MOTORS CORP.
  5. Remove the accelerator cable shield, if equipped.
  6. Disconnect the accelerator cable from the retaining clip.
  7. Disconnect the accelerator cable from the throttle body lever.
  8. Disconnect the cruise control cable from the accelerator cable bracket.
  9. Disconnect the accelerator cable from the accelerator cable bracket.
    10. Fig 3: Identifying Accelerator Cables
    GM12734Courtesy of GENERAL MOTORS CORP.
  10. Remove the accelerator cable from the vehicle noting cable routing.
scientia non olet · About LEMON Manuals