LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement (L61) >> Installation Procedure

Installation Procedure

  1. Guide the starter into the engine block (flywheel housing).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Installing Starter Motor (L61)
    GM895784Courtesy of GENERAL MOTORS CORP.
  2. Install the starter mounting bolts.

    Tighten:  Tighten the starter-to-engine bolts to 40 N.m (30 lb. ft.).

  3. Install the B+ cable and nut.

    Tighten:  Tighten the B+ cable-to-starter nut to 10 N.m (89 lb. in.).

  4. Install the S-terminal wire and nut.

    Tighten:  Tighten the S-terminal nut to 5 N.m (4 lb. ft.).

  5. Connect the negative battery cable to the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure .

    Tighten:  Tighten the battery terminal bolts to 17 N.m (13 lb. ft.).

  6. Reprogram the radio stations.
scientia non olet · About LEMON Manuals