LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Lighting Systems) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
  2. Remove the steering wheel stub shaft bolt and position the steering wheel stub shaft away from the steering column in order to gain access to the brake pedal adjustment position sensor. Refer to Intermediate Steering Shaft Replacement in Steering Wheel and Column.
  3. Remove the electrical connector from the brake pedal position sensor.
    4. Fig 1: View Of Position Sensor From Vehicle
    GM1238860Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt from the position sensor, and remove the position sensor from the vehicle.
scientia non olet · About LEMON Manuals