LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Relay FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Shift Lock Control Solenoid
    GM1285269Courtesy of GENERAL MOTORS CORP.
  1. Route the shift lock control solenoid through the opening in the front of the control assembly.
    2. Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body
    GM1285268Courtesy of GENERAL MOTORS CORP.
  2. Attach the ball-sockets to the control assembly body and the shift-lock control lever.
    3. Fig 3: Disconnecting Shift Lock Control Solenoid Connector From Solenoid
    GM1285267Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the Shift Lock Control Solenoid.
  4. Install the automatic transaxle control assembly. Refer to Floor Shift Control Replacement .
scientia non olet · About LEMON Manuals