Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Driver Information Center Display Switch Screw	2 N.m	18 lb in
Electronic Control Unit Screw	2 N.m	18 lb in
Front End Inflatable Restraint Discriminating Sensor Bolt	9 N.m	80 lb in
Inflatable Restraint Sensing and Diagnostic Module (SDM) Bolt	10 N.m	89 lb in
Inflatable Restraint Side Impact Sensor Bolt	10 N.m	89 lb in
Inflatable Restraint Side Impact Module Nut	5 N.m	44 lb in
Inflatable Restraint Steering Wheel Module Coil	2.5 N.m	22 lb in
Instrument Panel Compartment Screw	2 N.m	18 lb in
Instrument Panel Inflatable Restraint Module	10 N.m	89 lb in
Seat Belt Guide Loop Nut	42 N.m	31 lb ft
Seat Belt Retractor Bolt	42 N.m	31 lb ft
Steering Column Lower Shroud Bolt	1.5 N.m	13 lb in
Steering Column Upper Shroud Bolt	3.5 N.m	31 lb in
Steering Wheel Nut*	40 N.m	30 lb ft
* This is a prevailing torque type fastener. This fastener may be reused ONLY if: The fastener and its counterpart are clean and free from rust. The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating. If the fastener does not meet these criteria, REPLACE the fastener.